Classic Premium Grade Tweed Era Replicas
Custom wound interleaved output transformers, voltage corrected and accurate power transformers. High density non tinted eyelet board, Allen Bradley resistors, So Zo capacitors, all hand assembled and tested to perfection, using selected pine and Finnish Birch for the cabinets. Tinted to a golden amber. The absolute best tweed era replica money can buy.
Note: Product specifications, availability, and pricing subject to change without notice.
Low Country™
Forty five watt
5E8-A or 80 watt 5F8-A circuit. This is
the all time classic.
Features:
* Normal and Bright channels, with common bass, treble, middle, and presence controls on the high power model. The Low power 5E8-A does not have a middle control.
* My custom wound voltage corrected power transformer. No harsh tone robbing high voltages.
* My custom paper wound interleaved windings output transformer. Superb deep piano string bottom, with high end extension to give it that classic 5E8-A / 5F8-A acoustic quality.
* High Power 5F8-A tube compliment one 5AR4, four 5881 Tung Sol RI, two 12AX7's Mullard, and one NOS 12AY7 high power model.
* Low Power 5E8-A tube compliment two 5U4G, two 5881 Tung Sol RI, two 12AX7's Mullard, and one 12AY7 NOS.
* Features two Weber Alnico P12N style 12" speakers high power. Two Weber Alnico P12Q style 12" speakers low power model. These are accurate replicas of the Jensens that are prized in this amp. Their tone is accurate to the originals.
* All Allen Bradley carbon composition resistors.
* Jensen Copper foil, paper, and oil coupling capacitors. These really get the bloom and tone of the original Astrons.
* Sprague electrolytics in the correct values for correct power supply ratings.
* Solid 22g cloth covered wire as per the original.
* Superb wiring and layout, with attention to detail.
* Handmade cab covered with the correct tweed and spray tinted for consistent coverage and matched to one of our many 5E8-A / 5F8-A Twin restorations.
* The insides of our cabs are masked and taped before spraying to prevent tone robbing build up of tint and sealer.
* Absolutely the best 5E8-A / 5F8-A replica available at any price.
Low
Power Model
$2650.00
High power Model
$2850.00
No extra charge for export models!
The Regulator ™is available as an option for an additional $200.00. It features 0, 3, 6, and 9 dB of speaker output attenuation. The load is critically matched at all attenuation levels and is unsurpassed for transparent output stage attenuation. I am now offering a 0, 3, 6, 9, 12, 15 dB Regulator for $285.00. My three knob Reverb is available as an add on option for $500.00.
Piedmont™
Forty five watt 5F6-A circuit. This is
the all time classic. It just doesn't get any better than this.
Features:
* Normal and Bright channels, with common bass, treble, middle, and presence controls.
* My custom wound voltage corrected power transformer. No harsh tone robbing high voltages.
* My custom paper wound interleaved windings output transformer. Superb deep piano string bottom, with high end extension to give it that classic 5F6 acoustic quality.
* Tube compliment one current manufacture 5AR4, two 5881 Tung Sol RI, two 12AX7's Mullard RI, and one NOS 12AY7.
* Features four Weber Alnico P10Q style 10" speakers. These are spot on replicas of the original Jensen P10Q's, that are prized in this amp. Their tone is accurate to the originals.
* All Allen Bradley carbon composition resistors.
* Jensen Copper foil, paper, and oil coupling capacitors. These really get the bloom and tone of the original Astrons.
* Sprague electrolytics in the correct values for correct power supply ratings.
* Solid 22g cloth covered wire as per the original.
* Superb wiring and layout, with attention to detail.
* Handmade cab covered with the correct tweed and spray tinted for consistent coverage and matched to one of our many 5F6 Bassman restorations.
* The insides of our cabs are masked and taped before spraying to prevent tone robbing build up of tint and sealer.
* Absolutely the best 5F6-A replica available at any price.
$2700.00
No extra charge for export models!
The Regulator ™is available as an option for an additional $200.00. It features 0, 3, 6, and 9 dB of speaker output attenuation. The load is critically matched at all attenuation levels and is unsurpassed for transparent output stage attenuation. I am now offering a 0, 3, 6, 9, 12, 15 dB Regulator for $285.00. My three knob Reverb is available as an add on option for $500.00.
Tyger ™
Thirty watt, three ten combo, 5E7
circuitry.
Features:
* Normal and Bright channels, with common bass, treble, and presence controls.
* My custom wound voltage corrected power transformer. No harsh tone robbing high voltages.
* My custom paper wound interleaved windings output transformer. Superb deep piano string bottom, with high end extension to give it that classic 5E6 acoustic quality.
* Tube compliment one NOS 5U4, two 5881 Tung Sol RI, two 12AX7's Mullard RI, and one NOS 12AY7.
* Features three Weber Alnico P10Q style 10" speakers. These are spot on replicas of the original Jensen P10Q's, that are prized in this amp. Their tone is accurate to the originals.
* All Allen Bradley carbon composition resistors.
* Jensen Copper foil, paper, and oil coupling capacitors. These really get the bloom and tone of the original Astrons.
* Sprague electrolytics in the correct values for correct power supply ratings.
* Solid 22g cloth covered wire as per the original.
* Superb wiring and layout, with attention to detail.
* Handmade cab covered with the correct tweed and spray tinted for consistent coverage and matched to one of our many 5E7 Bandmaster restorations.
* The insides of our cabs are masked and taped before spraying to prevent tone robbing build up of tint and sealer.
* Absolutely the best 5E7 replica available at any price.
Winner of the Guitar Player editor's pick award.
$2500.00
No extra charge for export models!
The Regulator ™is available as an option for an additional $200.00. It features 0, 3, 6, and 9 dB of speaker output attenuation. The load is critically matched at all attenuation levels and is unsurpassed for transparent output stage attenuation. I am now offering a 0, 3, 6, 9, 12, 15 dB Regulator for $285.00. My three knob Reverb is available as an add on option for $500.00
Beaufort ™
Eighteen watt, 5E3 circuitry, one twelve combo,
chrome chassis, 5E3 circuit.
* Voltage corrected power and custom wound output transformer. No harsh high voltages. However, if you want to get the tone of an older overvoltaged 5E3 you can use a 5V4 or 5AR4 rectifier to get the plates up to that level.
* Normal and Bright channels with common tone control.
* Tube compliment is one NOS 5Y3GT, two 6V6 Tung Sol (RI), one 12AX7 EH, and one NOS 12AY7. All NOS tubes available.
* Jensen paper, copper foil, and oil coupling capacitors.
* Allen Bradley carbon composition resistors.
* Sprague electrolytics.
* Original solid 22g cloth covered wire.
* NOS tube sockets Mil Spec.
* CTS potentiometers, Carling switches, Switchcraft jacks.
* The cabinet is my build stock size 5E3 cabinet. Lacquer coated to a perfect orange amber patina. No overspray or glue spray on the interior to rob tone.
* Celestion Blue 12" speaker.
* Padded Tuki cover $87.00
The perfect size and power level for practice and performance. No extra charge for export version (Using my custom transformers).
$1500.00
Lil' Bit ltd™
Five watt / Ten
Watt, Single ended Pure Class "A" circuitry, one twelve combo,
chrome chassis.
*This amp features the chassis of a 5E3 with two separate input channels, (Bright and Normal) with a common tone control. Channels can be bridged for even more tonal options. The amp features the ability to operate with either a single or two 6V6's. You may also mix a 6V6 and a 6L6 for added tonal palette. Output wattage is easily selected by the use of one or two output tubes.
* Custom wound output transformer. Custom wound power transformer, No harsh high voltages.
* Volume / Volume / Tone control.
* Tube compliment is one 5Y3GT, one or two 6V6 Tung Sol (RI), two 12AX7 Mullard. All NOS tubes available.
* Jensen paper, copper foil, and oil coupling capacitors.
* Allen Bradley carbon composition resistors.
* Sprague electrolytics.
* Original solid 22g cloth covered wire.
* NOS tube sockets Mil Spec.
* CTS potentiometers, Carling switches, Switchcraft jacks.
* The cabinet is my build stock size 5E3 cabinet. Lacquer coated to a perfect orange amber patina. No overspray or glue spray on the interior to rob tone.
* Weber VST 12A125 12" speaker or Celestion G12H30 speaker. Your choice.
* Padded Tuki cover $87.00
The perfect size and power level for practice.
No extra charge for export version (Using my custom transformers).
$1450.00
Lil' Bit ™
Five watt, 5F1 circuitry, one twelve combo,
chrome chassis.
* Voltage corrected power and custom wound output transformer. No harsh high voltages.
* Single Volume control.
* Tube compliment is one 5Y3GT, one 6V6 Tung Sol (RI), one 12AX7 Mullard. All NOS tubes available.
* Jensen paper, copper foil, and oil coupling capacitors.
* Allen Bradley carbon composition resistors.
* Sprague electrolytics.
* Original solid 22g cloth covered wire.
* NOS tube sockets Mil Spec.
* CTS potentiometers, Carling switches, Switchcraft jacks.
* Switch to turn off the negative feedback for more gain and grind.
* The cabinet is my build stock size 5E3 cabinet. Lacquer coated to a perfect orange amber patina. No overspray or glue spray on the interior to rob tone.
* Weber VST 12A125 12" speaker.
* Padded Tuki cover $87.00
The perfect size and power level for practice. This 5F1 replica comes in my Beaufort cabinet and has a 12" speaker VS the originals wimpy 8" speaker.
No extra charge for export version (Using my custom transformers).
$1145.00
Reverb Unit™
Reverb unit. Lush over the top reverb. Reverb features Dwell, Mix, and Tone controls. Comes in a black tolex cabinet with silver grill / black grill cloth.
Reverb Unit™ |
Reverb Unit. Comes in a black tolex cabinet with silver / black grill cloth. |
STANDARD MODEL: $1000.00 |
Our gain boost overdrive pedal. Features a powder coat finish with hand painted graphics on each pedal. Full size internal components, hand-wired, point to point on a premium fiberboard circuit card ( just like my amps), external 9V power jack, true bypass, with Level, Tone, and Gain controls. Very even handed reproduction of your guitar's tone without frequency loss, from it's lowest gain settings to the highest. No low or high frequency loss or midrange hump like a tube screamer. No compression of your pick attack like tube screamer clones. The ability to play dissonant chords with note clarity. No frills, just the tone. $375.00
Classic 45 / Plexi Replicas
MTC-45
™
Forty five watt head. The ultimate 45 replica. Tube compliment one current
manufacture 5AR4, two 5881 Tung Sol, and three 12AX7 LPS. Aluminum chassis, glass epoxy
circuit card, authentic capacitors, AB resistors. Superior transformers and choke. This
is the sound of rock. Beautiful sweet clean tone with amazing morphing into
harmonically rich overdrive. You may just throw away all your distortion pedals after
using this amp. Cabinet cosmetics black tolex. White control panel and black knobs. You
may request this amp as a 45 or Plexi replica. Alternately I will build this as
a head version of the Piedmont with single 2 ohm output same price. Front
control panel will be labeled "Piedmont"
STANDARD MODEL: $2185.00
Note: Product specifications, availability, and pricing subject to change without notice.
